Categories
Manufacturers
Tell A Friend


Tell someone you know about this product.
Shopping Cart
  0 items
Rolling
Gallery
Top » Catalog » Engine » Intercoolers & Cooling » EWCEPC-C-180 » Evans Waterless Coolant Power Cool 180° 2ltr
[EWCEPC-C-180]
£29.95
£26.66
Brand new range available at Tuning Developments is the Evans Waterless Cooling Fluids range for all Vehicles

Application

For high performance engines fabricated from a mixture of cast iron, copper, steel and aluminium components

Typical Characteristics

Physical State : Low Viscosity Synthetic Liquid
Boiling Point : Above 180°C
Freezing Point : Below -40°C
Colour : Red Clear
Odour : Almost odourless
Taste : Slightly Sweet, Non-Toxic but not recommended for human consumption

ASTM & ISO Standards

Evans in association with ASTM committee D15.22 have developed a specific range of standards for waterless engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards.

To be competitive racing teams have to push their engines to the limit. This means delivering the greatest amount of fuel possible, without overheating the engine. Efficient heat dissipation is often compromised because water-based coolants boil inside the block, sometimes leading to catastrophic engine failure. Power Cool 180°C has a much higher boiling point than water or water-based coolants and ensures the heat-energy is always being removed, no matter what the load. This enables tuners to squeeze the maximum BHP from their engines.

Please Note: If switching to Evans Waterless Coolant for the first time you must also purchase EVANS Hygroscopic Prep Fluid to remove any dirt, scale and residual coolant.

Available in 2 litres or 5 litres (Please call if you require 25Litres).

About Evans Waterless Coolant

Since the 1930's engine coolants have been based on a mixture of water, ethylene glycol (antifreeze) and corrosion inhibitors. These mixtures have inherent physical and chemical limitations, they affect engine performance and in some circumstances lead to engine failures.
According to the British Testing Council - Testing Advisory Group... "up to 60% of engine failures can be attributed to cooling system failures"... confirming there are inherent flaws associated to water-based coolants and emphasising the need for something better!

EVANS WATERLESS COOLANT - Waterless coolant represents a major step forward in engine cooling technology which, over the last 20 years, have proven to increase engine reliability, reduce maintenance costs and improve performance.
NO WATER - NO OVERHEATING
Evans Waterless Coolants have boiling points above 180°C, effectively eliminating overheating, boil-over and after-boil.
NO WATER - NO PRESSURE
Evans Waterless Coolants have a very low vapour pressure, eradicating the danger of scalding and reducing the strain on engine components.
NO WATER - NO CORROSION
Water contains oxygen and acts as an electrolyte which leads to corrosion. Evans Waterless Coolants eliminate these corrosion sources.
NO WATER - MORE BHP
Evans waterless Coolants eliminate engine hotspots which lead to poor combustion and loss of power.
NO WATER - NO LINER EROSION
Evans Waterless Coolants are proven to reduce liner pitting by 75% compared with water based coolants.
NO WATER - NO SCALING
Water contains impurities and hardness salts that lead to scaling and poor heat transfer. Evans Waterless Coolants contain none of these impurities.
NON TOXIC
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

Product Listing:

Evans Waterless Coolant Power Cool 180° 2litre Bottle

£29.95   £26.66
This product was added to our catalog on Wednesday 29 November, 2017.
Reviews