Categories
Manufacturers
Tell A Friend


Tell someone you know about this product.
Shopping Cart
1 x GFB G Force 3/G-Force III EBC Electronic Boost Controller
1 x AEM Failsafe Wideband Air/Fuel Ratio Boost Gauge Kit #30-4900
1 x FPR Fuel Rail Adaptor Toyota Starlet Glanza Turbo 4EFTE
1 x K1 Technologies Forged Conrod Kit Mazda 3 6 MPS 2.3 DISI
£1,053.45
Rolling
Gallery
New Products
Displaying 1 to 12 (of 3345 new products) Result Pages:  1  2  3  4  5 ...  [Next >>] 
Stage1+ Performance Tuning Package MK3 Ford Focus ST250 Ecoboost
  £1,449.00
Date Added: Wednesday 05 December, 2018 Manufacturer: Tuning Developments
Tuning Developments Stage 1+ Performance Tuning Package for the MK3 Ford Focus ST 250 2012-on with 2.0 Ecoboost engine. Tuning Developments have developed this package on our own MK3 Ford Focus ST 250 Ecoboost, having picked up the vehicle in standard form; we set about getting some baseline runs of the car on our in-house Dyno Dynamics 4WD dyno. The results were as expected, making 256hp and 260 lb.ft torque. A promising start. We then set about looking to make improvements. We have fabricated our own in house turbo back exhaust system which is available in super resonated, resonated and non resonated variables. Our particular vehicle uses the super resonated system for quieter exhaust volume when cruising and on the motorway and so forth, yet gives off a nice rumble when you start pressing on the throttle. We decided to use 3” tube throughout the system as to aid ...

Stage 1 Performance Tuning Package MK3 Ford Focus ST250 Ecoboost
  £1,349.00
Date Added: Wednesday 05 December, 2018 Manufacturer: Tuning Developments
Tuning Developments Stage 1 Performance Tuning Package for the MK3 Ford Focus ST 250 2012-on with 2.0 Ecoboost engine. Tuning Developments have developed this package on our own MK3 Ford Focus ST 250 Ecoboost, having picked up the vehicle in standard form; we set about getting some baseline runs of the car on our in-house Dyno Dynamics 4WD dyno. The results were as expected, making 256hp and 260 lb.ft torque. A promising start. We then set about looking to make improvements. We have fabricated our own in house turbo back exhaust system which is available in super resonated, resonated and non resonated variables. Our particular vehicle uses the super resonated system for quieter exhaust volume when cruising and on the motorway and so forth, yet gives off a nice rumble when you start pressing on the throttle. We decided to use 3” tube throughout the system as to aid a...

Precision Ramhorn DIY Turbo Kit Toyota Celica MR2 3SGTE
  £1,295.00
Date Added: Friday 30 November, 2018 Manufacturer: Tuning Developments
Another new launch from Tuning Developments, our 3SGTE Precision Billet CEA Series Ramhorn Turbo Kits! Available for the 3S-GTE in both Rev2 & Rev3 Fitment (ST185 & ST205 respectively) the Precision Ramhorn Series Kit is what you need to make the most of your Celica GT4, All-Trac or MR2 Turbo! A range of turbo options are available depending on the requirements of the customer, this kit can support from 350bhp to 900bhp! Each kit comes with all parts to bolt to the engine and exhaust, including nuts & bolts! Depending on intercooler setup the piping may need slight adjustment to suit the larger turbo. All our kits include our Ramhorn Thick Wall Exhaust Manifold which has been designed for optimal flow and close to equal length design to aid with maximum performance, wastegate positioning has also been designed with correctly sized 44mm Wastegate to ensure...

Exhaust CATBack Exhaust (Super Resonated) Toyota GT86 Subaru BRZ
  £619.00
Date Added: Sunday 25 November, 2018 Manufacturer: Tuning Developments
Tuning Developments Exhaust Components for the popular Toyota GT86, Subaru BRZ and Scion FRS! Item: CAT Back Exhaust System (Super Resonated) One of many parts which will be coming from Tuning Developments for your GT86, BRZ or FRS! Manufactured here in the UK, with all joints utilising superior flanges and bolts as opposed to lesser quality sleeve jointing with clamps. The Tuning Developments CAT Back Exhaust is made from high quality T304 grade stainless steel, which is mandrel bent ensuring that pipes aren’t crushed or deformed when being bent for better gas flow and sustained pipe bore size throughout the system, this in turn helping to maximise performance gains. On top of all this, the weight of this exhaust system is substantially less than the factory system, improving performance further again! The exhaust is also fabricated with further modifications in m...

Uprated Exhaust Manifold & Decat Pipe for Toyota Celica GT4 MR2
  £598.99 £540.00
Date Added: Friday 23 November, 2018 Manufacturer: Tuning Developments
Yet another new product from Tuning Developments, the CT20B/CT26 Turbocharger bolt on High Flow Uprated Tubular Performance Exhaust Manifold & High Flow Decat Downpipe for all Toyota Celica GT-Four ST205 and Toyota MR2 Turbo SW20 3SGTE, Made in house, in the UK at Tuning Developments. Provides a even high flow increase for all 4 runners helping to reduce high cylinder temperatures and improve performance, and made from Steam Pipe to take the stress and heat from a turbo car without issue, unlike some cheaply manufactured stainless units which usually crack, there is no other Manifold on the market that matches the quality of this Made in the UK product! Custom made and designed in house in the UK by our highly skilled fabricators at Tuning Developments to be a complete bolt on fitment with the best possible performance gains, must have for any Toyota Celica GT-Four ST20...

Uprated Exhaust Manifold for Toyota Celica GT4 MR2 Turbo 3SGTE
  £449.99 £419.99
Date Added: Friday 23 November, 2018 Manufacturer: Tuning Developments
Yet another new product from Tuning Developments, the CT20B/CT26 Turbocharger bolt on High Flow Uprated Tubular Performance Exhaust Manifold for all Toyota Celica GT-Four ST205 and Toyota MR2 Turbo SW20 3SGTE, Made in house, in the UK at Tuning Developments. Provides a even high flow increase for all 4 runners helping to reduce high cylinder temperatures and improve performance, and made from Steam Pipe to take the stress and heat from a turbo car without issue, unlike some cheaply manufactured stainless units which usually crack, there is no other Manifold on the market that matches the quality of this Made in the UK product! Custom made and designed in house in the UK by our highly skilled fabricators at Tuning Developments to be a complete bolt on fitment with the best possible performance gains, must have for any Toyota Celica GT-Four ST205 and Toyota MR2 Turbo SW20...

Performance Turbo Up-pipe Subaru Impreza WRX STI 2001-on
  £149.00
Date Added: Monday 12 November, 2018 Manufacturer: Tuning Developments
Tuning Developments Exhaust Components for the popular Subaru Impreza Newage WRX STI 2001-on Models with EJ20/EJ25 Engine Item: Performance 2inch Turbo Up-pipe Kit One of many parts available from Tuning Developments for your Subaru Impreza WRX STI! Manufactured here in house in the UK, with all joints utilising superior 10mm flanges and bolts. The Tuning Developments Performance Up-pipe Section is made from high quality T304 grade stainless steel, which is mandrel bent ensuring that pipes aren’t crushed or deformed when being bent for better gas flow and sustained pipe bore size throughout the system, this in turn helping to maximise performance gains. On top of all this, the weight of this up-pipe section is substantially less than the factory up-pipe, improving performance further again! This 2inch performance up-pipe kit from Tuning Developments will directly bo...

3inch Super Res CAT Back Exhaust System MK3 Ford Focus ST 250
  £619.00
Date Added: Monday 29 October, 2018 Manufacturer: Tuning Developments
Tuning Developments Exhaust Components for the popular MK3 Ford Focus ST 250 Models with 2.0 Ecoboost Engine Item: 3inch CAT Back Exhaust System (Super Resonated) One of many parts available from Tuning Developments for your MK3 Ford Focus ST 250! Manufactured here in house in the UK, with all joints utilising superior flanges and bolts as opposed to lesser quality sleeve jointing with clamps. The Tuning Developments CAT Back Exhaust is made from high quality T304 grade stainless steel, which is mandrel bent ensuring that pipes aren’t crushed or deformed when being bent for better gas flow and sustained pipe bore size throughout the system, this in turn helping to maximise performance gains. On top of all this, the weight of this exhaust system is substantially less than the factory system, improving performance further again! The exhaust is also fabricated with fu...

Solid Hard Boost Intercooler Pipe Kit for MK3 Ford Focus ST 250
  £269.99
Date Added: Tuesday 02 October, 2018 Manufacturer: Tuning Developments
Tuning Developments Solid Intercooler Boost Hard Pipe Kit for the popular MK3 Ford Focus ST 250 Models with 2.0 Ecoboost Engine Item: Solid Hard Intercooler Boost Pipe Kit for Ford Focus ST250 2.0 Ecoboost One of many parts available from Tuning Developments for your MK3 Ford Focus ST 250! Manufactured here in house in the UK, The Tuning Developments hard pipe kit for the Focus ST 2.0 Ecoboost ST250 is an absolute must for high power cars..It eliminates all the restrictions created by the standard boost pipe tract whilst offering added strength and reliability to higher boost applications. Made from full Stainless Steel for maximum strength and performance with all Bends CNC Mandrel bent to ensure the maximum airflow, while allowing for a 100% bolt on fitment to the 2.0 Ecoboost engines. We supply the full kit, replacing the restrictive steel 50mm link pipe f...

Injector Dynamics ID1050X Nissan Skyline GTR RB26DETT
  £649.99
Date Added: Monday 24 September, 2018 Manufacturer: Injector Dynamics
Injector Dynamics ID1050X 1050cc Injector Set (6 Injectors) - To Suit all RB26DETT Engines ID1050 - Nominal Flow Rate - 1065cc/min *Dynamic flow rates measured at 3 bar (43.5 psi) using VP Racing C16 Gasoline. Fitment: Application specific fitment is handled with the addition of various top hat adapters, and occasional machining operations. Standard fitment exists for most popular applications, and new fitments will be developed on request. All standard lengths and fuel rail bores are currently accomodated. Dynamically Matched Sets: We only sell matched sets, and within each set the dynamic flow rate (slope) will vary no more than +/- 1%, and the dead time (offset) will vary no more than +/- 20 microseconds which is equivalent to +/- 1% at a pulsewidth of 2 milliseconds. It is this dynamic flow matching across the pulsewidth range that separates the men fr...

Drive In Drive Out TD04 Turbo Kit Toyota Starlet Glanza 4EFTE
  £1,710.00 £1,499.00
Date Added: Monday 24 September, 2018 Manufacturer: Tuning Developments
Another new product from Tuning Developments, the popular TD04 turbo kit but now available as a Drive in, Drive out conversion package! Many will argue the TD04 suits the 4EFTE better than its intended home on the EJ20, and it has never been easier to 'TD04' your Starlet GT or Glanza V with help from Tuning Developments! Each conversion includes all parts needed to fit the turbo to the engine* with a steampipe ramhorn manifold using the optimum bore size for the 4EFTE/5EFTE engine flow and 3inch stainless downpipe, each kit comes with a TiAL MVS 38mm external wastegate. Not only this but every kit also has a running a vent to atmosphere screamer pipe and our Conversion package is a truely drive in, drive out package including all Labour work for installing the Turbo kit and all required parts! This turbo kit is half size radiator friendly and also fits will ALL aft...

Brian Crower Stage 2 Camshaft Kit Toyota Supra JZA80 2JZGTE VVTI
  £699.99
Date Added: Tuesday 18 September, 2018 Manufacturer: Brian Crower
Another new product from Tuning Developments for the 2JZGTE VVTI platform is the outstanding Brian Crower Stage 2 Camshafts, must have upgrade for any 2JZGTE VVTI Engine aiming for over the 580-600BHP area while still retaining good driveability and idle. Direct plug and play application, with direct fitment onto standard valve springs and shim/bucket combination, while we do recommend our uprated valve spring kit as a excellent combo with these camshafts, these can be used with completely stock valvetrain. 264 Duration Exhaust and Inlet offers a excellent upgrade over stock specifications with extremely easy fitment. Check out our full range of 2JZGTE VVTI Valvetrain and bottom end performance upgrades from Tuning Developments. Fitment: Toyota Supra JZA80 2JZGTE VVTI Engines Toyota 2JZGTE VVTI Engine...

Displaying 1 to 12 (of 3345 new products) Result Pages:  1  2  3  4  5 ...  [Next >>]